Screening machine daily maintenance needs attention to those

Screening machine maintenance is a systematic and more professional job,

1, placed around the probe position to carry out thorough cleaning and finishing, forbidden to have a metal detector placed in the electromagnetic material and where there is water;

2, as long as the initial use of the detector, should strictly follow the instructions to install, prevent their machines or other similar models confused, at the same time try to avoid installation
Touching its front and rear ends of the belt;

3, in place during the installation process, to ensure that the machine is fixed at the bottom of the support legs, avoid casters touch the ground, in order to ensure smooth movement of the machine;

4, each time to conduct a thorough cleaning and maintenance after using the detector, every day with a professional tool to clean the probe should strictly avoid metal residue attached to pass

Conveying belt;

5, the belt should regularly be cleaned and adjusted, screening machine to prevent their slipping and wear during operation; and finally, is to strictly follow the instructions related to custody
Line storage, the machine will be damaged with normal machine kept separate to avoid non-professional staff of the detector use.

6. Many local screening machine, security doors, handheld metal detectors will be used in conjunction with, but to mainly from among the three who are not too close, otherwise they will interfere with each other, affect the safety effect.