Screening machine acceptance of the Standard Rules

Installation, commissioning and acceptance criteria:

Cargo installation, inspection will be strictly in accordance with the national standard, line marked and strictly implement ISO9001 quality management system standards of conduct.

1. Preliminary Acceptance

Consumer goods reach the designated place, the staff will be invited to check with consumer goods packaging is intact, check the number and send the goods to the parts list are the same.

2. Unpacking

Accompanied by consumer staff unpack the goods, according to the list on the packing list, inventory items arrive.

3. Installation

This step is done by our staff, our staff will be the equipment installation and commissioning.

4. Acceptance Criteria

Acceptance criteria for matters GB, whichever promised tender documents, as follows:

. a mechanical structure of acceptance:

1) The skin should be intact, flat and smooth surface, uniform color, no obvious mechanical damage, the coating should not have blistering damage, no corrosion of metal parts, plastic parts no blistering, cracking.

2) All equipment parts, components have sufficient rigidity, all regulation, control mechanism installed properly, flexible operation. Panel legible.

3) outer cover to facilitate the demolition.

4) The whole frame stiffness and strength should meet normal move will not be damaged.

5) equipment casters qualified strength, flexibility qualified, reliable connection to the device.

6) Housing protection not less than IP20.

b. Electrical safety inspection

1) X-ray machine power supply voltage within ± 15% of the 220V to work properly.

2) at room temperature detection system insulation resistance should be no less than 100MΩ.

3) Leakage current should be less than 5mA.

4) with ground protection ends, the color is yellow-green ground wire.

c. X-ray generator inspection

   1) X-ray generating means to achieve self-cooling.

   2) When the temperature or pressure exceeded, can automatically stop emitting X-rays.

   3) X-ray generator with over-voltage and over-current protection, when the X-ray source of power or current excessive, can automatically cut off the pressure.

   4) X-ray generator with protective grounding wire, and the color is yellow-green.

d. Operating Software acceptance

   1) The operating software should be wholly Chinese.

   2) includes the person logging management.

   3) Software various functions should be no loopholes.

e. the image recognition and acceptance

   1) Measured over the image package should meet the national standard.

   2) includes an inverted image, low energy, amplification, sharpening, and other functions.

Wei Antai is the screening machine production and sales of after-sales service capabilities, specializes in security equipment, X-ray screening machine 0755-27955177